User manual

V07H01Y
2
1
FRONT OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
1
V07H02Y
1
2
2
REAR OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
Wheel
Occasionally, wheel nuts should be re-
moved to apply anti-seize lubricant on
studs to ease future removal. This is
particularly important when vehicle is
used in salt-water environment or in
mud. Remove one nut at a time, lu-
bricate then retorque.
Wheel Bearing Condition
Push and pull the wheels from the
upper edge to feel the play. See an
authorized Bombardier ATV dealer if
there is any play.
V07H03Y
Tires/Wheels

WARNING
When the tires are replaced, never
install a bias tire with a radial tire.
Such a combination could create
handling and/or stability prob-
lems.
Donotmixtiresofdifferentsize
and/or design on the same axle.
Front and rear tire pairs must be
the identical model and manufac-
turer.
For unidirectional tread pattern,
ensure that the tires are installed
in the correct direction of rotation.
The radial tires must be installed
as a complete set.
Severe injury or death can result
if you do not follow these instruc-
tions.
104
_____________________