User manual

V07C0IY
1
1. Fuse holders
4
V07G02Y
2
13
1. Accessories (15 A) (power outlet and
auxiliary supply)
2. Fan (20 A)
3. Main (20 A)
4. Charging system (30 A)
To remove fuse from holder, remove
the fuse holder cover then pull fuse
out. Check if filament is melted.
A15E0KY
1
2
TYPICAL
1. Fuse
2. Check if melted
Bulb Replacement

WARNING
Always turn the ignition switch
OFF before replacing a defective
bulb.
Always check light operation after re-
placement.
Headlamps
CAUTION:
Never touch glass por-
tion of an halogen bulb with bare
fingers, it shortens its operating life.
If glass is touched, clean it with iso-
propyl alcohol which will not leave
a film on the bulb.
Unplug connector from headlamp.
V04G02Y
102
_____________________