User manual

Using a feeler gauge, set the spark
plug gap to 0.7 mm (0.27 in).
Apply anti-seize lubricant over spark
plug threads to prevent a possible
seizure.
Screw spark plug into cylinder head by
hand and tighten with a torque wrench
and a proper socket.
Torquesparkplugto20N•m
(15 lbf•ft).
Battery

WARNING
Never charge a battery while in-
stalled in vehicle.
Removal
Disconnect BLACK (-) cable first then
RED (+) cable.

WARNING
Always respect this order for dis-
assembly; disconnect BLACK (-)
cable first.
Remove the holding strap then pull the
battery out of frame.
1
V07G0OY
2
1. Battery
2. Holding strap
Cleaning
Clean battery, battery casing and bat-
tery posts using a solution of baking
soda and water.
Remove corrosion from battery cable
terminals and battery posts using a
firm wire brush. Battery casing should
be cleaned by soft brush and baking
soda solution.
Installation
Reinstall battery in vehicle.

WARNING
ConnectRED(+)cablefirstthen
BLACK (-) cable. Always connect
RED (+) cable first.
NOTE: Place the BLACK (-) cable be-
tween holding strap and battery.
V07G0HY
Fuses
If a fuse is damaged, replace it by one
of the same rating.
CAUTION:
Donotuseahigher
rated fuse as this can cause severe
damage.
Fuses are located in the service com-
partment, behind tool box.
_____________________
101