Operation Manual

39
ENGLISH
NOTE:
• Forhygienicreasonsexchangethewaterin
the tank after 24 hours.
• Toavoidfungiandbacterialeavethelid
open after use.
Ice cube container
Remove the ice cube container and clean it with
a mild detergent under running warm water.
Casing and Interior
• Cleancasingandinteriorwithadampcloth
• Useadilutedsolutionofvinegarandwater
Drain Residual water
Drain the residual water if the appliance is not in
use for a longer period of time.
Rest the appliance on a table edge. Hold a bowl
under residual water drain valve.
• Turntheresidualwaterdrainvalveanti-clock-
wise to drain off the rest of water.
• Closetheresidualwaterdrainvalveafterthe
residual water has been drained.
Storage
• Werecommendthatyoukeeptheappliance
in the original packing if you do not intend
using it for long periods.
• Alwayskeeptheapplianceoutofthereachof
children in a dry, well-ventilated place.
Problem Possible Cause Solution
WORKindicatorlightis PowerSourceisnotswitchedon. 1. Checkthepowersupplymatches
notilluminating.   2. Checkthepowercordisconnected
correctly
3. Internal components are damaged.
Maintenance in professional
department.
ICEFULLindicator 1.Icefullness. 1. RemovethefullIcecube.
light is illuminating. 2. Low-temperature protection 2. Move the Ice maker to a warmer
  (temperatureislowerthan5ºC).  place,wheretheambient
    temperatureishigherthan5ºC.
ADD WATER indicator Water Shortage 1. Add drinking water into Ice maker,
light is illuminating. and press Button.
2. Water supply system is damaged.
Maintenance in professional
department.
ICEFULLandADD 1.IceMakingboxisinserted 1. Checkwhetheranyforeignbody
WATER indicator lights in wrong position. stuck the Ice making box.
are both illuminating. 2. Internal components are damaged.
Ice making performance Maintenance in professional
is not good. Abnormal department.
noise.
 1.Heateliminationisbad. 1. Cleanthedustonthecoolingfan
 2.Watertemperatureistoohigh.  andairinlet/outletpart.
3. Ambient temperature is too high. 2. Fill normal temperature water.
4. Refrigerant leaks. 3. Do not place the appliance in high
Fan or pump is damaged. temperature conditions.
4. Refrigerating system is damaged.
Maintenance in professional
department.
Troubleshooting