Operation Manual
38
ENGLISH
Making Ice Cubes
NOTE:
For hygienic reasons do not use the ice cubes
fromtherstcycle.
1.Connectthemainsplugtothewallsocket.Do
not turn on the ice maker within 30 minutes
after moving.
2.Openthelidandremovetheicecube
container.
3. Pour water into the water tank up to the
MAX-marking. Please use drinking water for
making ice.
CAUTION:
Onlyusedrinkingwaterwithoutadditives!
NOTE:
• TheMAXmarkingisinsidethewatertank,
around the lower edge of the ice cube
container.
• Thewaterlevelmustbebelowtheicecube
container.
• Onlyusewateratroomtemperature.
4. Replace the ice cube container and close
the lid
5. Press key to start making ice.
6. The process takes around 10 minutes.
7. Keep the lid closed.
NOTE:
• Dependingonwater/ambienttemperature
thersticecubescomeoutabitsmaller
• Duetofastfreezingtheicecubescanlook
milky. This is the air trapped in the water
anddoesnotinuencethequalityoftheice
cubes.
Stop Ice Cube Production
Press key to stop Ice cube production
NOTE:
Beforenallystoppingtheappliance
automatically empties the water tank and
dissolves already produced ice cubes.
Main switch
Press
tostart/stoptheicecubeproduction
Press to resume making ice cubes after
addingwaterwhenwatertankisempty;the
indicator lamp ADD WATER turns off.
Press to eliminating errors
Indicator Lamp ICE FULL
• Thelampindicatestheicestorageboxisfull.
Remove all the ice cubes from the box.
• Thelowtemperatureprotection(ambient
temperatureislowerthan5ºC)
Indicator Lamp ADD WATER
The Indicator lamp turns on if the water tank is
nearly empty .The unit turns off automatically.
1.Openthelidandremovetheicecubebox
2. Pour water into the water tank up to the
MAX-marking. Please use drinking water for
making ice.
3. Replace the ice cube container and close the
lid. Press key to start making ice.
Indicator Lamp WORK
• Theindicatorlampstartsashingassoonas
unit was plugged into the wall socket.
• Duringoperationindicatorlampilluminates
continuously.
CAUTION:
Wait at least 3 minutes before turning the
appliance on again, otherwise the compressor
can be damaged.
Cleaning
WARNING:
Always disconnect from mains power supply
before cleaning.
CAUTION:
• Donotuseharshorabrasivecleaning
agents.
• Donotusechemicals,acids,petroloroil
products.
• Donotsubmergetheapplianceinwater.