Operation Manual

face only with a so
ft, damp cloth and commercia
ly, food safe cleaners.
•
Soak heavily soiled areas with some warm soapy
water or a vinegar cleaner.
•
Wipe off grease residues from the sealing framed
the cooking chamber.
•
Use a soft absorbent cloth for drying after clea
ing.
Cleaning the glass panel
Cleaning the glass panelCleaning the glass panel
Cleaning the glass panel
If necessary, clean the inside of the glass panel.
• Open the appliance door.
•
Press the release tabs at the side of the retaining
strip in order to remove it.
• Take off
the glass carefully forward.
•
Replace the glass panel and the retaining strip
properly; after you’ve cleaned the glass and dried
it thoroughly.
Reverse the bulb
Reverse the bulbReverse the bulb
Reverse the bulb
WARNING:
WARNING:WARNING:
WARNING:
•
Make sure that the appliance is turned off from
the power supply (fuse).
•
Allow the lamp to cool down before replacing the
bulb. There is risk of burns!
There is risk of burns!There is risk of burns!
There is risk of burns!
NOTE
NOTENOTE
NOTE:
::
:
Use the correct bulb, heat resistant up to 300°C:
1 x 15 W, 230 V
1 x 15 W, 230 V1 x 15 W, 230 V
1 x 15 W, 230 V~
~~
~
• Unscrew the lamp cover anti-
clockwise and clean
it with a dry cloth.
• Change the bulb.
• Reattach the
lamp cover and screw it tight in a
clockwise direction.
• Check the functionality.
12
ft, damp cloth and commercia
l-
Soak heavily soiled areas with some warm soapy
Wipe off grease residues from the sealing framed
Use a soft absorbent cloth for drying after clea
n-
If necessary, clean the inside of the glass panel.
Press the release tabs at the side of the retaining
the glass carefully forward.
Replace the glass panel and the retaining strip
properly; after you’ve cleaned the glass and dried
Make sure that the appliance is turned off from
Allow the lamp to cool down before replacing the
Use the correct bulb, heat resistant up to 300°C:
clockwise and clean
lamp cover and screw it tight in a
Trou
TrouTrou
Trou
bleshooting
bleshootingbleshooting
bleshooting
Before you contact an
Before you contact an Before you contact an
Before you contact an
authorized specialist
authorized specialistauthorized specialist
authorized specialist
Problem
ProblemProblem
Problem
Possible causes
Possible causesPossible causes
Possible causes
Appliance
does not
work
The power supply
is
disconnected.
Oven lamp
does not
work
B
ulb is defective,
has been inserted
incorrectly or not
firmly.
Strong for-
mation of
smoke
Grease residue in
the oven.
NOTE:
NOTE:NOTE:
NOTE:
If a problem still persists after following the steps
above, contact your distributor or an authorized tec
nician.
bleshooting
bleshootingbleshooting
bleshooting
authorized specialist
authorized specialistauthorized specialist
authorized specialist
Possible causes
Possible causesPossible causes
Possible causes
What to do
What to doWhat to do
What to do
The power supply
disconnected.
Check the fuse
of your domestic
wiring system.
ulb is defective,
has been inserted
incorrectly or not
Check the bulb,
see “Reverse
the bulb”.
Grease residue in
Switch off the
oven and allow
to cool down
before cleaning.
If a problem still persists after following the steps
above, contact your distributor or an authorized tec
h-