Operation Manual
NOTE
NOTENOTE
NOTE:
::
:
If the recipe
recommends putting the food in the pr
heated oven only
, this should not be done before the
control lamp turns off for the first time
Oven lighting
Oven lightingOven lighting
Oven lighting
The oven lighting automatically turns on as soon as
the oven is in operation.
Using the accessory
Using the accessoryUsing the accessory
Using the accessory
Inside the oven are levels for
inserting the ac
ries. The accessories are safely used between the
side levels.
CAUTION:
CAUTION:CAUTION:
CAUTION:
Always insert the accessory completely into the o
en; otherwise the glass door can be scratched.
Dish
Dish Dish
Dish carriage
carriagecarriage
carriage
The roller-
mounted drawer beneath the oven
ber is used to store the accessories.
Selecting appropriate cookware
Selecting appropriate cookwareSelecting appropriate cookware
Selecting appropriate cookware
Wrong
WrongWrong
Wrong!
!!
!
Cookware is too small.
Heat loss!
Cookware ground uneven.
Poor heat transfer!
Lid does not close properly.
Heat loss!
Correct
CorrectCorrect
Correct!
! !
! To save time a
To save time aTo save time a
To save time and energy!
nd energy!nd energy!
nd energy!
Diameter of the cookware corresponds
with the
diameter of the hob
The cookware base is fully resting
and the lid closes
properly.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
The cooking surface and the base of the cookware
must always be clean and dry.
8
recommends putting the food in the pr
e-
, this should not be done before the
control lamp turns off for the first time
.
The oven lighting automatically turns on as soon as
inserting the ac
cesso-
ries. The accessories are safely used between the
Always insert the accessory completely into the o
v-
en; otherwise the glass door can be scratched.
mounted drawer beneath the oven
cham-
Cookware ground uneven.
Lid does not close properly.
Diameter of the cookware corresponds
diameter of the hob
.
and the lid closes
The cooking surface and the base of the cookware
Switching on and off
Switching on and offSwitching on and off
Switching on and off
...the oven
...the oven...the oven
...the oven
The oven is equipped with various functions. Baking
can be done
with upper heat, lower heat and grill
heat. Set the required o
perating conditions.
•
Set the oven function selector
propriate position.
• Turn the
oven temperature selector switch in
clockwise direction
to the desired temperature.
• To switch the oven off,
both switches
turned to the off-
position again.
…
……
…the hob
the hobthe hob
the hob
•
Place suitable cookware on the
ing zone.
• Turn the corresponding
level regulator
sired temperature level.
•
Double cooking and roasting tin zone (depending
Double cooking and roasting tin zone (depending Double cooking and roasting tin zone (depending
Double cooking and roasting tin zone (depending
on model)
on model)on model)
on model)
By rotating the respective level regulator cloc
wise until it stops (about level 9), the additional
heating zone is added via
you can select the temperature level.
•
After the end of the cooking process t
regulator back to the off-
state.
NOTE
NOTENOTE
NOTE:
::
:
Countersink
the selector switches
tors flush in the control panel
wanted operation.
Residual heat indicator
Residual heat indicatorResidual heat indicator
Residual heat indicator
WARNING: Risk of burns!
WARNING: Risk of burns!WARNING: Risk of burns!
WARNING: Risk of burns!
Do not touch the cooking zones while the residual
heat indicator lights up.
After switching off the cooking zones the residual
heat indicator of the corresponding
lights up. This warns against touching the zone.
The oven is equipped with various functions. Baking
with upper heat, lower heat and grill
perating conditions.
Set the oven function selector
switch to the ap-
oven temperature selector switch in
to the desired temperature.
both switches
must be
position again.
Place suitable cookware on the
respectively cook-
level regulator
to the de-
Double cooking and roasting tin zone (depending
Double cooking and roasting tin zone (depending Double cooking and roasting tin zone (depending
Double cooking and roasting tin zone (depending
By rotating the respective level regulator cloc
k-
wise until it stops (about level 9), the additional
heating zone is added via
a switching point. Now
you can select the temperature level.
After the end of the cooking process t
urn the level
state.
the selector switches
and level regula-
tors flush in the control panel
to protect against un-
WARNING: Risk of burns!
WARNING: Risk of burns!WARNING: Risk of burns!
WARNING: Risk of burns!
Do not touch the cooking zones while the residual
After switching off the cooking zones the residual
heat indicator of the corresponding
cooking zone
lights up. This warns against touching the zone.