Operation Manual

15
OPERATION
Oven functions and operation．
Natural convection oven
（conventional）
The oven can be heated up using the bot－
tom and top heaters．The oven is controlled
by one knob handling，serving as a work
type switch integrated with a temperature
regulator．
Oven on and off
In order to switch on the oven you need to：
! Set required working conditions of the
oven，its temperature and a mode of
heating．
! Set the knob to the required position，turn－
ing it right．
▲
Waring：During use the appliance become hot．Care should be taken to avoid
touching heating elements inside the oven.
The analogue programmer for start／end cooking time
Setting timer and cooking time（only available on electric and touch models）
Note：The action for programming the electric or touch is same．the differen of
them is electric models should p r e s s t he bottom and the touch models should
touch the symble
Setting timer
1．Press two times then use or to set oclock，press again then
use the or to set minute．
2．Waitting for about five seconds，the appliance will set the time auto．
Programming your cooking
！Select a cooking mode before programming．
Programming time
1．Press two times then use or to set hour ，press again then
use or to set minute if need.
2．waitting for about five seconds ，then the appliance will set the time auto．
3．when the selected time has elapsed，the oven will stop cooking．
Programming delayed cooking
1．use the programming cooking step 1and 2 to set your cooking time．
2．Press two times then use or to set oclock，press again then
use the or to set minute need.
3．Waitting for about five seconds，the appliance will set the time auto．
4．When the selected time has elapsed the oven will star and stop programm-
ing auto ．
．For example ：it is 10：00 am ．A time of 1 hour is programming，and 15 minu-
tes delayed cooking is programming.the programming will stars automatically
at 10:15am,and automatically stop at 11:15am.