Operation Manual

13
NOTE:
NOTE:NOTE:
NOTE:
If a problem still persists after following the steps
above, contact your distributor or an authorized tech-
nician.
Technical Data
Technical DataTechnical Data
Technical Data
Electrical connection…………………………...………..
Electrical connection…………………………...………..Electrical connection…………………………...………..
Electrical connection…………………………...………..
Connection voltage: …......................220-240 V~ / 50 Hz
Connection power: ………………………..…........2350 W
Fuse protection: ………………...……………...……..10 A
Protection class: ………………………..…..…...…I / IPX0
Dimension H x W x D /
Dimension H x W x D / Dimension H x W x D /
Dimension H x W x D / Weight……...……..…………..
Weight……...……..…………..Weight……...……..…………..
Weight……...……..…………..
Oven: ………...………………….59.8 x 59.5 x 55.0 cm
Dimension upper cabinet: ….....60.0 x 56.0 x 55.0 cm
Dimension lower cabinet: .58.0-58.3 x 56.0 x 55.0 cm
Net weight: ……………………...........………...30.0 kg
The right to make technical and design modifications
in the course of continuous product development
remains reserved.
Disposal
DisposalDisposal
Disposal
Meaning of the “Dustbin” Symbol
Meaning of the “Dustbin” SymbolMeaning of the “Dustbin” Symbol
Meaning of the “Dustbin” Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority.
WARNING:
WARNING:WARNING:
WARNING:
Remove or disable any existing snap and bolt locks,
if you take the unit out of operation or dispose it.
Information to professional users for disassembly
Information to professional users for disassemblyInformation to professional users for disassembly
Information to professional users for disassembly
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
Information for non-destructive disassembly for
maintenance purposes
 Remove the lamp as described in the manual.
 For maintenance purposes, the oven door can be
hang out and reinstalled, for the procedure please
refer to the manual.
 A further disassembly for maintenance purposes is
not provided.
 If you would like to exchange defective compo-
nents, please contact our customer service.
 Accumulators are not included.
Information for disassembly in terms of recycling,
recovery and disposal at the end of the life of the
appliance
 The disassembly of appliances with a gas connec-
tion should only be carried out by a licensed gas
and water installer.
 The disassembly of appliances with electrical con-
nections should be carried out by a licensed electri-
cian.
 For the recycling and recovery of resources give
the appliance to:
- a communal collection point waste disposal au-
thorities,
- a dedicated disposal company, offering a return
system,
- a resident electric trader, who voluntary with-
draws electrical appliances.