Operation Manual

11
• Turn the function selector switch in the corre-
sponding position.
• Preheat the oven for approx. 5 minutes.
• Brushes the grill grid with a little oil, so that the
grilling food does not stick on it.
• Slide an empty baking tray for dripping grease to
directly lower level, below the grill grid. Pour some
water into the baking tray for later easily cleaning.
Energy saving
Energy saving Energy saving
Energy saving t
tt
tips
ipsips
ips
• Only preheat if it is specified in the recipe.
• Use dark, black painted or enamelled tins. They
absorb the heat particularly well.
• Open the oven door as less as possible during
operation.
• Use the residual heat after cooking process.
Switch the oven off a few minutes before ending
the cooking / baking time. So your baking product
even cooked in the stored oven heat.
Information to reduce the environmental effect of
Information to reduce the environmental effect of Information to reduce the environmental effect of
Information to reduce the environmental effect of
cooking
cookingcooking
cooking (acc. VO (EU) No. 66/2014 appendix I,
(acc. VO (EU) No. 66/2014 appendix I, (acc. VO (EU) No. 66/2014 appendix I,
(acc. VO (EU) No. 66/2014 appendix I,
No. 2)
No. 2)No. 2)
No. 2)
 We recommend the use of dark baking molds and
plates, because they conduct the heat better.
 Any unnecessary accessories should be removed
from the baking chamber before using the appli-
ance.
 During cooking, the oven door should remain
closed to avoid unnecessary heat loss.
 Only preheat the oven if required by the recipe.
 If a selection of cooking time is specified, always
use the lowest recommended temperature.
 Use the residual heat by switching back to mini-
mum temperature shortly before the end of the
cooking time.
 Save electricity! If you do not need the oven, switch
off functions such as interior lighting, program,
temperature
 Clean the oven after each application, to keep the
cleaning effort as low as possible. We recommend
the use of biological cleaners.
Cleaning and Maintenance
Cleaning and MaintenanceCleaning and Maintenance
Cleaning and Maintenance
WARNING:
WARNING:WARNING:
WARNING:
• Always switch off the appliance completely and
where required, disconnect the plug or turn off /
unscrew the fuse before cleaning and user
maintenance.
• Allow the appliance to cool down sufficient before
cleaning.
• Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock!Risk of electric shock!
Risk of electric shock! Hot steam could damage
the plastic parts.
• Never use flammable substances, such as thin-
ner, kerosene, gasoline or acids for cleaning.
• The appliance must be dry before restarting oper-
ation.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use harsh abrasive cleaners or sharp met-
al objects for cleaning the glass surface. The sur-
faces can be scratched or destroyed.
• Always consider the application and safety notes
of the detergent.
Removing the oven door
Removing the oven doorRemoving the oven door
Removing the oven door
You may remove the oven door to facilitate cleaning
and to get better access to the oven interior.
• Open the appliance door completely.
• Fold up the retaining brackets (a)
of the hinges on both sides.
• Slightly close the door and lift it up to remove it.