Operation Manual

The provided mounting holes
(A) are visible after opening
the oven door on the left and
right frame.
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an
shock
shockshock
shock!
• Do not use mu
ltiple sockets or extension cords.
•
It is not allowed to modify the plug provided with
the appliance. If the plug does not fit properly to
the outlet, let install a proper outlet by an autho
ized specialist.
• If possible, t
he accessibility of the power plug
must be ensured in order to disconnect the
ance
from the power supply in case of an eme
gency.
•
Ensure that your mains power corresponds with
the specifications of the appliance. The specific
tions are printed on the rating label.
• Connect the mains ca
ble to a properly installed
and earthed wall outlet.
•
If the plug after installation is not accessible, a
corresponding
disconnect device with a contact
separation of at least 3 mm must be available to
meet
the relevant safety regulations.
Startup / Operat
Startup / OperatStartup / Operat
Startup / Operation
ionion
ion
Before initial use
Before initial useBefore initial use
Before initial use
•
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
•
Heat the closed oven for approx. 30 minutes at
250°C in order to burn any manufacturing
Use the heating function [Upper/
lower
6
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an
electric
electric electric
electric
ltiple sockets or extension cords.
It is not allowed to modify the plug provided with
the appliance. If the plug does not fit properly to
the outlet, let install a proper outlet by an autho
r-
he accessibility of the power plug
must be ensured in order to disconnect the
appli-
from the power supply in case of an eme
r-
Ensure that your mains power corresponds with
the specifications of the appliance. The specific
a-
tions are printed on the rating label.
ble to a properly installed
If the plug after installation is not accessible, a
disconnect device with a contact
separation of at least 3 mm must be available to
the relevant safety regulations.
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
Heat the closed oven for approx. 30 minutes at
250°C in order to burn any manufacturing
residue.
lower
heat].
NOTE
NOTENOTE
NOTE:
: :
:
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
sure for a good ventilation of the room during
heating.
Operation
Operation Operation
Operation
/ Switching on and off
/ Switching on and off/ Switching on and off
/ Switching on and off
1
1 1
1 Oven
Oven Oven
Oven
function selector switch
function selector switchfunction selector switch
function selector switch
The function selector switch is used to
set the type of heating.
Rotate the function selector switch until the icon for
the desired type of heating points upwards. The
switch may be rotated clockwise and countercloc
wise.
2
2 2
2 Ov
OvOv
Ov
en temperature selector switch
en temperature selector switchen temperature selector switch
en temperature selector switch
The temperature selector switch is used
to adjust the oven temperature.
The thermostat allows the temperature setting from
50°C to 250°C.
CAUTION:
CAUTION:CAUTION:
CAUTION:
Turn the temperature selector switch only clockwise
and back again. Othe
rwise the switch will be da
aged.
Power control lamp
Power control lampPower control lamp
Power control lamp
The power control lamp indicates the operation of the
appliance. It lights up as soon as the function sele
tor switch is operated and goes off when the switch is
in the off position.
Temperature contro
Temperature controTemperature contro
Temperature control lamp
l lampl lamp
l lamp
The temperature
control lamp
operation. If the lamp goes
off
ture is reached.
During operation, the oven must continuously rehea
to keep the temperature stable. When r
control lamp is lighting
(thermostat fun
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
n-
sure for a good ventilation of the room during
/ Switching on and off
/ Switching on and off/ Switching on and off
/ Switching on and off
function selector switch
function selector switchfunction selector switch
function selector switch
The function selector switch is used to
set the type of heating.
Rotate the function selector switch until the icon for
the desired type of heating points upwards. The
switch may be rotated clockwise and countercloc
k-
en temperature selector switch
en temperature selector switchen temperature selector switch
en temperature selector switch
The temperature selector switch is used
to adjust the oven temperature.
The thermostat allows the temperature setting from
Turn the temperature selector switch only clockwise
rwise the switch will be da
m-
The power control lamp indicates the operation of the
appliance. It lights up as soon as the function sele
c-
tor switch is operated and goes off when the switch is
control lamp
indicates the heating
off
, the set oven tempera-
During operation, the oven must continuously rehea
t
to keep the temperature stable. When r
eheating the
(thermostat fun
ction).