Operation Manual

Unpacking the Appliance
Unpacking the ApplianceUnpacking the Appliance
Unpacking the Appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.
•
To prevent hazards, check the appliance for any
transport damage.
• In case of damage
, do not put the appliance into
operation. Contact your distributor.
NOTE
NOTENOTE
NOTE:
::
:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance EquipmentAppliance Equipment
Appliance Equipment
Applian
ApplianApplian
Appliance Overview
ce Overviewce Overview
ce Overview
1
11
1 Control panel 3
33
3 Vie
wing window
2
22
2 Door handle 4
44
4
Oven full glass door
De
DeDe
Delivery scope
livery scopelivery scope
livery scope
1 x standard tray,
1 x grill grid, installation material
Installation
InstallationInstallation
Installation
WARNING:
WARNING:WARNING:
WARNING:
The appliance
must not be connected to the mains
during installi
ng. Otherwise there is
electric shock hazard
electric shock hazardelectric shock hazard
electric shock hazard!
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
• The worktop, the cabinet
, veneers
ings, used
adhesives etc. must be sufficient
resistant.
5
Unpacking the Appliance
Unpacking the ApplianceUnpacking the Appliance
Unpacking the Appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
To prevent hazards, check the appliance for any
, do not put the appliance into
operation. Contact your distributor.
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance EquipmentAppliance Equipment
Appliance Equipment
wing window
Oven full glass door
1 x grill grid, installation material
must not be connected to the mains
ng. Otherwise there is
danger to life
danger to lifedanger to life
danger to life or
, veneers
, plastic coat-
adhesives etc. must be sufficient
heat-
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
• The device
must be installed so that heat can be
dissipated
. The ventilation openings must not be
blocked.
• Keep a distance
to the appliances back
guarantee a sufficient air circulation.
• Do not fix
any heat protection strips in order to
ensure an adequate supply of cooling air.
NOTE
NOTENOTE
NOTE:
: :
:
Recommandations!
Recommandations!Recommandations!
Recommandations!
•
When installing, ask another person to assist.
• Wear prote
ctive gloves to avoid injuries at
ble sharp edges.
• When carrying the
appliance use the
handles at the housing
sides
Cabinet opening and appliance dimensions Fig. 1
Cabinet opening and appliance dimensions Fig. 1Cabinet opening and appliance dimensions Fig. 1
Cabinet opening and appliance dimensions Fig. 1
Prepare the cabine
t opening
sional drawings.
Dimensions in mm:
Installing the oven
Installing the ovenInstalling the oven
Installing the oven
• Put the appliance
with the connecting cable f
into the prepared cabinet not completely
• Connect the appliance
to the main
"Electrical connection".
• Insert the oven
into the cabinet opening
ly
. Make sure that the cable
(bent, squeezed or twisted)
•
Attach and secure the oven
plied
screws on the side walls of the cabi
must be installed so that heat can be
. The ventilation openings must not be
to the appliances back
in order to
guarantee a sufficient air circulation.
any heat protection strips in order to
ensure an adequate supply of cooling air.
Recommandations!
Recommandations!Recommandations!
Recommandations!
When installing, ask another person to assist.
ctive gloves to avoid injuries at
possi-
appliance use the
recessed
sides
.
Cabinet opening and appliance dimensions Fig. 1
Cabinet opening and appliance dimensions Fig. 1Cabinet opening and appliance dimensions Fig. 1
Cabinet opening and appliance dimensions Fig. 1
t opening
according to the dimen-
with the connecting cable f
irst
into the prepared cabinet not completely
.
to the main
power, see
into the cabinet opening
complete-
. Make sure that the cable
does not restricted
(bent, squeezed or twisted)
.
Attach and secure the oven
by using the sup-
screws on the side walls of the cabi
net.