Operation Manual

2020
Error Possible cause Remedy
The glass surface is scratched. Youareusingrough,unevencookwareand/oran
aggressive abrasive cleaner or sharp metal utensils.
- Only use cookware with an even bottom,
see“Selectingtherightcookware”.
- See“Cleaning”
A quiet humming is heard when a high
power setting is selected.
That is caused by the induction technology. This does not refer to any error. The noise
should disappear as soon as the power setting
has been reduced.
Ventilation noises can be heard. Theappliancehasaltertopreventoverheatingofthe
electronics. The fan will still continue to run for a few
seconds after the appliance has been shut off.
This does not refer to any error. Do not switch
off the power supply while the fan is running.
Cookwaredoesn’tgethot. The appliance cannot recognize the cookware. The
cookware is not suitable for induction, is too small for
the cooking zone or is not centered on the cooking
zone.
- Use cookware suitable for induction, see
“Selectingtherightcookware”.
- Ensurethatthecookwaretsontothe
cooking zone and that it is centered.
Some pans make cracking or clicking
noises.
This may be caused by the construction of your
cookware(layersofdifferentmetalsvibratingdifferently).
This is normal for cookware and does not
indicate a fault.
NOTE:
Should you still have problems with your device after following the steps above, please contact your distributor or an authorized specialist.
In the case of a malfunction, the induction hob will automatically go into safety mode and the respective error code will be shown:
Error Code Possible Cause Remedy
F3-F8 Power unit has failed. Restart the stovetop after the temperature returns to normal.
Contact a specialist company if necessary.
F9-FE Temperature sensor IGBT has failed. Restart the stovetop after the temperature returns to normal.
Contact a specialized company if necessary.
E1/E2 Problem with power supply. Make sure that your supply voltage is ok.
Contact specialized company if necessary.
E3/E4 Overheating. Check the pot.
Restart the stovetop after the temperature returns to normal.
Contact a specialized company if necessary.
E5/E6 Bad heat dissipation. Restart the stovetop after the temperature returns to normal.
Contact a specialized company if necessary.
Technical Data
Model: ............................................................................................................................................................................................................................EBK 965
Power supply: ........................................................................................................................................................................................ 220 - 240 V~, 50/60 Hz
Power consumption: ....................................................................................................................................................................................................... 3500 W
Protection class: .......................................................................................................................................................................................................................... I
UnitsizeHxLxW: .....................................................................................................................................................................................5.6x28.8x52.0cm
Built-insizeLxW: ...............................................................................................................................................................................................26.8x50.0cm
Net weight: ............................................................................................................................................................................................................. approx.5.2kg
Therighttomaketechnicalanddesignmodicationsinthecourseofcontinuousproductdevelopmentremainsreserved.
This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has
been constructed in accordance with the latest safety regulations.