Operation Manual

1515
Device Description
NOTE:
The listed performances can vary depending on material and/or size of the cookware.
1 Cookingzone1:180mm,max.2000W
2 Cookingzone2:140mm,max.1500W
3 Glass ceramic plate
4 On/off-button
5 Control panel
Control panel
1 On/off-button
2 Power / timer control
3 Cooking zone selection buttons
4 Timer(Timerswitch)
5 Child lock
Scope of delivery
4xmountingclips 4xcross-headscrews
Description of the functions
Functional principle
When cooking with induction, the heat will only be created with magnetic force when cookware with a magnetizable bottom is placed onto a cooking
zone which is turned on. Only the bottom of the cookware is thereby heated, but not the cooking zone itself.
Benets:  -timesavings  -energy-saving
- easy cleaning - controlled heat supply and safety
Pot detection
The heating function is interrupted, if:
• cookwareofunsuitablesize,
• ofnon-magneticmaterial(e.g.aluminum),
• orasmallobject(e.g.knife,fork,andbowl)isplacedontothecoolingareaor
• thecookwarewasremoved.
Thenotication“
”willashonthedisplayoftherespectivecookingzone.Ifsuitablecookwareisnotplacedontotherespectivezonewithinaminute,
the appliance will switch to standby mode. After around another minute, the appliance will switch off automatically.
Overheating protection
Atemperaturesensormonitorstheinsideoftheappliance.Ifthemaximumtemperatureisexceeded,theapplianceisautomaticallyshutofftoprevent
damage.
Residual heat display
Aftershuttingofftheappliance,thedisplayoftherespectivecookingzonesshowsthesymbol“H”(Residualheat).Thisgivesawarningnottotouch
the zone.
WARNING: Risk of burning!
Do not touch the cooking zones as long as the residual heat indicator is on.