Operation Manual
1414
Control panel
1 On/off-button
2 Power / timer control
3 Cooking zone selection buttons
4
Timer(Timerswitch)
5 Child lock
Scope of delivery
4xmountingclips 4xcross-headscrews
Description of the functions
Overheating protection
Atemperaturesensormonitorstheinsideoftheappliance.Ifthemaximumtemperatureisexceeded,theapplianceisautomaticallyshutofftoprevent
damage.
Residual heat display
Aftershuttingofftheappliance,thedisplayoftherespectivecookingzonesshowsthesymbol“H”(Residualheat).Thisgivesawarningnottotouch
the zone.
WARNING: Risk of burning!
Do not touch the cooking zones as long as the residual heat indicator is on.
NOTE:
After having switched off the heating power, you may use the residual heat for different purposes, such as heating up or keeping food warm without
having to switch on the heating power.
Automatic switch-off
The automatic switch-off is a protective function for your appliance. If a stovetop is in operation for a long period and if you do not enter anything on the
control panel, the automatic switch-off will be activated. For the standard times of the different power settings, please refer to the following table:
Power setting 1 2 3 4 5 6 7 8 9
Shut-offtime(hours) 8 8 8 4 4 4 2 2 2
Child lock
The appliance is equipped with a child lock to prevent children from turning on the appliance accidentally.
Installation / Fitting
CAUTION:
• Thestovetophastobeinstalledsothattheheatcanbedissipated.Airintakeandoutletmaynotbeblocked.
• Theworktop,backwalls,veneers,laminates,andadhesivesusedmustbesufcientlyheat-resistant(upto100°C).
Conditions for the installation location
• Theappliancemayonlybeinstalledononesidenexttohigherkitchenfurniture,appliances,orwalls.
• Theapplianceshouldnotbeinstalleddirectlynexttorefrigeratorsorfreezers.Duetotheheatdissipation,theenergyconsumptionofthecooling
appliances will increase unnecessarily.
• Atleast5cmfreespacemustremainundertheentirecut-outfortheappliance.Heat-sensitiveobjects(basecabinet,drawer,etc.)maynotbe
locatedinthisarea.Possiblyexistingside-wallsordrawercabinetsmustbecutout,ordisassembledaccordingly.
• Wheninstallingthedevice,ensuresufcientaircirculation“Fig.1”.