User manual

ManualsBrandsBOMANN ManualsDomestic AppliancesPlinth-mount extractor hood 600 mm DU623.2 inox 68 dB Stainless steel

Before you

Before you Before you

Before you

contact an authorized specialist

contact an authorized specialistcontact an authorized specialist

contact an authorized specialist

The following problems can be solved by you by checking for the possible cause.

Problem

ProblemProblem

Problem

Possible cause

Possible causePossible cause

Possible cause

The appliance is

not working or

does not work

properly

Is the unit not connected to mains power

- Have you

set the power level?

The appliance

does not run

efficiently

Have you set the correct power level?

- Are

the grease filter dirty?

Are the carbon filter needed for

(correctly) installed?

Is the air outlet required for extraction mode

clear?

The lighting does

not work

The lighting is faulty, was incorrectly installed,

lamp not secure in the fitting.

Oil dripping from

the appliance

The

grease filter are

NOTE:

NOTE:NOTE:

NOTE:

If a problem still persists

after following the steps abo

Electrical connection…………………………...…………………………………………………………………………..

Electrical connection…………………………...…………………………………………………………………………..Electrical connection…………………………...…………………………………………………………………………..

Electrical connection…………………………...…………………………………………………………………………..

Mains voltage: …………......………………..............................................................................................

Mains frequency: ………………………...…………………………………………………………………………….......50 Hz

Power consumption:

…………………………….....................................................................................................105 W

Lighting, LED: ………………………………...………………………………………………………………………...1 x 28 W

Protection class: …………………………………………………………………………………………………………………II

Dimen

DimenDimen

Dimen

sion H x W x D / Weight..……...…………………………………………………………………………………...

sion H x W x D / Weight..……...…………………………………………………………………………………...sion H x W x D / Weight..……...…………………………………………………………………………………...

sion H x W x D / Weight..……...…………………………………………………………………………………...

Hood body: ……...……………......................................................................................................13

Net weight: …………………….……....…………………………………………………

Available accessory…………………………..…………

Available accessory…………………………..…………Available accessory…………………………..…………

Available accessory…………………………..…………

Activated carbon filter for recirculation mode: …………

KFM 565 (Art.-No. 256 500)

not supplied

The right to make technical and design

mains reserved.

Troubleshooting

TroubleshootingTroubleshooting

Troubleshooting

contact an authorized specialist

contact an authorized specialistcontact an authorized specialist

contact an authorized specialist

The following problems can be solved by you by checking for the possible cause.

Solution

SolutionSolution

Solution

Is the unit not connected to mains power

set the power level?

Insert the plug properly in the contact soc

et. Check the fuse.

- Check the setting.

Have you set the correct power level?

the grease filter dirty?

Are the carbon filter needed for

recirculation

(correctly) installed?

Is the air outlet required for extraction mode

Check the setting. The kitchen is not prope

ly ventilated.

Clean the grease filter (see “Cleaning the

aluminum grease filter”).

Check the carbon filter (see “Replac

activated carbon filter”).

Check the air outlet.

The lighting is faulty, was incorrectly installed,

lamp not secure in the fitting.

Check the lighting (see “Replacing the ligh

ing”).

grease filter are

dirty.

Clean the grease filter

after following the steps abo

ve, contact your trader or an authorized technician.

Technical Data

Technical DataTechnical Data