User manual

18
ENGLISH
ENGLISH
Symbols on the control panel
Symbol
Meaning/
function
Symbol
Meaning/
function
Microwave
Child-proof lock
activated
Defrosting Auto function
Grill Weight in grams
Microwave
+ grill
Programmed
Start
Power
high/low
Avoiding Fire Hazards with Built-in Appliances
Always observe the instructions contained in the section “Instal-
lation Instructions”.
• Do not remove the feet on the underside of the device.
• Use only the mounting materials supplied for the installation.
• When installing the microwave oven, please adhere to the
dimensions shown in drawings 1 and 2.
• The rear wall of the cupboard has to be removed!
• There is a ventilation slot at the bottom edge of the mounting
frame. Keep the ventilation slots free at all times.
Installation Accessories
Item Designation Number
A
Adjustment screw 1
B Mounting frame 1
C
Screw 1
D
Dummy plug 1
Installation Instructions
This microwave oven must be installed in a tall or wall cupboard.
Please note the following instructions:
• Remove everything that is fragile from the adjacent cup-
boards.
• For installation the cabinet must meet the following condi-
tions:
• The cupboard must not contain any cracks, splinters or
other damage. All connections must be stable.
• The cupboard must be designed for a minimum load of
40 kg.
• The microwave oven must be installed at a height of at
least 85 cm.
• The rear wall of the cupboard has to be removed so that
the microwave oven is ventilated!
• The thickness of the cupboard wall must be at least
19 mm.
• Wall cupboards must be anchored fi rmly in the wall with
at least 2 screws. Check the stability by attaching an
appropriate weight.
• In the case of wall cupboards the installation depth of
the cupboard has to be at least 320 mm.
CAUTION:
Do not install the device above a cooker!
• When installing the device it must be ensured that there is a
power socket within reach.
• The mains socket must be within easy reach, so that the
plug can be quickly removed in an emergency.
• Important! Do not connect the device to the mains power
supply until after installation!
WARNING:
• Please adhere to the dimensions stated in the installation
instructions.
• The installation accessories supplied should be used.
• If screws are inserted too deeply (screws too long) this
may damage the device or represent a hazard to the user
or others.
Dimensions of the Built-in Cupboard
Make a built-in cupboard or a niche in accordance with the
following dimensional drawings. Figure 1 is for wall cupboards,
fi gure 2 for tall cupboards.
Installation (Figures 3 to 6)
• Screw the adjustment screw (A) completely into the upper
air duct (E).
• Put the microwave in the built-in cupboard.
• Now unscrew the adjustment screw until it is about 1 mm
below the top of the cupboard.
 NOTE:
This prevents the microwave oven from tilting over in the
cupboard.
05_EMWG 2215 CB.indd 1805_EMWG 2215 CB.indd 18 23.03.2010 14:04:33 Uhr23.03.2010 14:04:33 Uhr