User`s manual

User’s Manual UNI CAM 3.1 Digital Camera
- 13 -
I. Connecting with Your TV / VCR
1. Connect the black plug of the Video Output Cable into the
Video Output Port on the camera.
2. Connect the yellow plug of the Video Output Cable to the
Video-in Plug on your TV / VCR.
3. Press Menu Button and go to TV Out Mode. Press OK
Button.
4. Select either NTSC or PAL to match your TV / VCR system.
5. And now, you can view photos or playback video in your TV
with larger view.
J. Format Memory Card
1. Press Menu Button and go to Card Format. Press OK Button.
2. Select Yes to start formatting the SD memory card in the
camera.
3. After that, it will return to standby mode.
Note :
When format completed, it would erase all pictures, video and
recorded voice in the SD memory card. Please perform back-up
procedure if necessary before formatting the memory card.
K. Check Memory Capacity
1. Press Menu Button and go to Memory Status. Press OK
Button.
2. It will show the remaining memory capacity and % used of the
SD memory card.
Note :
In standby mode, an icon also shows the status of memory
capacity.