Specifications

Item Description Details
BASIC CONFIGURATION
Inline 4 Cylinder, Direct Injection
MOUNTING
Type Pedastal Feet with Rubber Isolators
Cooling and Lubrication
(The lubrication system also serves as the cooling medium)
HEAT EXCHANGER
Type Oil to water, Shell to tube
Type Gear Rotor
LUBRICATION / COOLANT PUMP
Drive Toothed Timming Belt
LUBE OIL FILTER
Type Spin-on 0.4L
ENGINE HEATER
Type 120V, 150 Watt Immersion Oil pan Heater
Fuel System
Type Piston
FUEL PUMP
Drive Engine Camshaft
Type Unit pump (1 per cylinder)
INJECTION PUMP
Drive Engine Camshaft
INJECTOR
Type 5 Hole Nozzle
AIR CLEANER
Type Dry Type, Disposable
FUEL FILTER
Type Spin-on, 0.6L with water separator
Engine Components
Type 1 Piece Block Type
CYLINDER HEAD
Material Gray Cast Iron
Type One Piece - Vertical Inline
CYLINDER BLOCK
Material Grey Cast Iron
Drive Toothed Timing Belt and Pulley
CAMSHAFT
Material Steel with Bimetal Bearings
Material Nodular Cast Iron
CRANKSHAFT
Balance Integral Counterweights