Specifications

DFP4 2011 Operation Manual
17
3. If the engine does not start then repeat step 2 above using the manual crank “B”
solenoid lever.
4. If the starter engages and turns the engine but it doesn’t crank and run; then
alternate between the “MANUAL CRANK A” and “MANUAL CRANK B”
solenoid levers. Use each switch five times while alternating between them.
5. If the starter engages for every starting attempt and the engine fails to run; then
consult the fault table in section 7.1 or call the DEUTZ service department.
3.3. Monitoring Engine Operation
This section contains information about monitoring the operation of your DEUTZ engine.
3.3.1. Tachometer / Hour Meter
The tachometer displays the speed at which your engine is running. Built into the
tachometer is a digital display for engine operation hours. This display will only count
up while the engine is running, see below.