Specifications

DFP4 2011 Operation Manual
15
3. If the engine doesn’t start, lift and hold the “MANUAL CRANK B” switch and
release it once the engine starts. Attempt to start the engine for 15 seconds.
4. If the starter engages and turns the engine but it doesn’t crank and run; then
alternate between the “MANUAL CRANK A” and “MANUAL CRANK B”
switches. Use each switch five times while alternating between them.
5. If the starter engages for every starting attempt and the engine fails to run; then
consult the fault table in section 7.1 or call the DEUTZ service department.