Specifications

DFP4 2011 Operation Manual
14
3.2.1. Electric Starting
NOTE: Do not engage the starter for more than 15 seconds at a time. If the engine
doesn’t start, wait a minute and then try again. If the engine doesn’t start after multiple
attempts, then inspect the engine to ensure it’s been setup properly. Please refer to your
engine’s maintenance, service and trouble shooting guides for further information.
3.2.2. Without cold start assistance
1. Put the MODE SELECTOR switch to MANUAL START.
2. Lift and hold the “MANUAL CRANK A” switch, releasing it when the engine
starts. Attempt to start the engine for 15 seconds (see below).