Specifications

DFP4 2011 Operation Manual

3. Engine Operation

3.1. Commissioning

This section contains information regarding the operation of your engine.

3.1.1. Adding Engine Oil

3.1.1.1. Initial Engine Oil Fill-Up

NOTE: If the person operating the engine does not warm up the engine until the

thermostat opens, the oil level may lie above the “Max” mark on the dipstick when

delivered. The correct level can then only be assessed after the engine has been warmed

up.

Please follow the steps below to add engine oil:

1. Add oil to the engine until the oil level reaches “Max” indicated on the engine

dipstick.

2. In addition, top off the oil quantity in the supply hoses and external oil cooler.

See section 8.2 for quantities.

3. Allow the engine to run warm until the thermostat opens (at approximately 95

degrees C)