Specifications

94
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
The find and replace routine.
Click in the FIND WHAT box and enter the item you want to find. Click on THE FIND
NEXT box and the G-Code Editor will locate the next occurrence of that item.
Successive clicks on Find Next will continue to search through the program. Use Match
Whole Word to limit the search to the entire word. For example, if you want to find G2,
but not G20 or G22, select Match Whole Word Only.
Instead of typing the item into the Find What box, you may simply highlight an item on
the G-Code Editor screen. That item will be entered into the Find What box for you.
To make changes to Find What items, type what you want to have into the Replace With
box. You can replace items one at a time by clicking first the FIND NEXT box then the
REPLACE WITH box for as many changes as you want to make. You can replace every
item in the program with a single click of the REPLACE ALL box.
Return closes the G-Code Editor and returns the screen to the Edit Mode.
Note: If you use the USB Thumb Drive to store a G-code (.gcd) program file, you must
leave the Thumb Drive plugged into the USB port the entire time the program is in
current memory. If you unplug the thumb drive with the program still in current
memory, the ProtoTRAK will display an error message.