Specifications

88
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
After you press the HELP hard key, the screen will display all the different parameters
that can be displayed on the spreadsheet. To either select or deselect any parameter,
simply highlight that parameter and press SET. When you are finished, press the Return
softkey and return to the spreadsheet.
10.2.2 Sorting Data
Data may be sorted by any of the data types displayed in the column head. Red letters
show which column is used for sorting the data.
To change the sort, press the SORT softkey, then select the type of data you want to use
for sorting from the softkeys.
The table will be changed to sort the data in ascending order (the smallest value first, the
largest last).
10.2.3 Making Global Changes to Data
Sometimes it is useful to be able to change data in a program without having to go
through each event one at a time. For example, if you were to want to change the tool
number for every milling event, it may be a chore to go through each event in a long
program to make the changes on that event type.
In order to make global changes:
1. Sort the data in a way that groups together the things you want to change.
2. Highlight the data value that is highest on the table (nearest to the top) that you want
changed.
3. Press the CHANGE ALL softkey. All the inputs that are the same as the one you
highlighted and are listed together below the data you highlighted will then be
highlighted.
4. Enter the new value, then press set. All the highlighted data will be changed to the
value you just input.
Example:
From the screen shown in 10.2, we will change the Z Feed for each of the mill events in
the program.
1. Sort by event type to get all the Mill events together.
2. Highlight the Z Feed in the first Mill event (Event # 8).