Specifications

iii
Southwestern Industries, Inc.
TRAK 2
OP
Installation, Maintenance, Service & Part List Manual
13.7 Feedrate and Speed Overrides
13.8 Data Errors
14.0 Program In/Out Mode 126
14.0.1 Filenames and File Extensions
14.1 Softkey Selections in the Program In/Out Mode
14.2 Basic Navigation of Program In/Out Mode Screens
14.2.1 Basic Parts of the Program In/Out Mode Screens
14.2.2 Softkeys in the Program In/Out Mode Screens
14.3 Opening a File
14.3.1 Creating a Master Program
14.3.2 Preview Graphics
14.4 Saving Programs
14.5 Copying Programs
14.6 Deleting Programs
14.7 Renaming
14.8 Backing Up
14.9 Converters™
14.9.1 Activating Converters
14.9.2 Converting From a Different Format
into a ProtoTRAK PMX CNC
14.9.3 Converting From the ProtoTRAK PMX CNC to
a Different Format
14.10 ProtoTRAK and TRAK CNC Compatibility
14.10.1 File Formats
14.10.2 Opening .MX3 and .PT4 files on a
ProtoTRAK PMX CNC
14.10.3 Running ProtoTRAK PMX Files on ProtoTRAK
and TRAK CNC Controls
14.11 Running G Code Files (GCD)
14.11.1 G Codes Recognized by the ProtoTRAK PMX
GCD Converter
14.11.2 M Codes Supported by the ProtoTRAK PMX
CNC
14.11.3 Valid Characters for Word/Address Sequences
14.12 Networking
14.12.1 A Basic Peer-To-Peer Network
14.12.2 Assigning a Name and Selecting a Workgroup
14.12.3 Mapping Network Drive
14.12.4 General Information For Advanced Networks
14.13 CAD/CAM and Post Processors
14.13.1 Writing a Post Processor
14.13.2 Convertible G-Codes for CAM converter
14.13.3 Supported Addresses
14.13.4 Format Terms and Definitions
14.13.5 Accepted M Codes
15.0 4
th
Axis Option 156
15.1 4
th
Axis Specifications
15.2 Definitions, Terms, and Concepts
15.2.1 Direction of 4
th
axis
15.2.2 Feed rate
15.3 DRO Mode
15.3.1 JOG
15.3.2 GO TO
15.3.3 RETURN ABS 0
15.3.4 SET A
15.3.5 REF 4
th
Axis
15.4 PROG Mode
15.4.1 POSN
15.4.2 MILL 4 AXIS
15.4.3 ENGRAVE 4 AXIS
15.4.4 AUX Event
15.4.5 LOOK
15.5 PROG SETUP Modes
15.5.1 PART/FIX MGMT Screen
15.5.2 Tool Path
15.6 MACHINE SETUP Mode
15.6.1 SERV CODES Screen
15.6.2 4
th
AXIS ON / OFF
15.7 PROG I/O
15.7.1 4
th
Axis G-Code notes
15.8 4
th
Axis Setup Notes