Specifications

32
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
4.12 ATC Operation
4.12.1 Advancing The Carousel
The tool carousel button is located on the front control panel and can rotate the carousel
clockwise or counterclockwise. The door must be closed in order for the carousel to
rotate.
4.12.2 Manual Tool Load and Unload
The green button located on the front of the spindle headstock is the clamp and unclamp
button. Manually loading and unloading tools can only be done with the door open.
4.13 Lubrication
The lubrication reservoir is located at the rear of the machine. The unit cycles
automatically when the control is on. A button is located on the front of the unit and
when pressed will pressurize the lubrication system. The pressure gauge will register a
value and the button should be released. Only when the button is released does oil get
supplied to all parts of the machine.
4.14 Help Functions
When a blue question mark appears next to the HELP hard key, that means special
functions or configuration settings are available for the current operation. For example, at
the program header with the highlight on the program name, the blue question mark
appears. Pressing the HELP key at that time will call up a table with alpha and special
characters you can use to name your program.
4.14.1 Math Helps
When the blue question mark does not appear, pressing HELP will initiate the Math
Helps.
The first Math Helps screen. Choose among the alternatives based on the information you
need to calculate.