Specifications

20
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
3.3.1 Overall Machine Dimensions
Width of LPM without chip cart and auger chute 89.75”
Depth of LPM 88”
Height of LPM with head all the way up 103”
Width of LPM with chip cart and side doors open 157”
Minimum height to fit LPM through doorway (Z cable carrier collapsed) 85”
Machine weight 7650 lbs.
3.3.2 Machine Specifications
Table Dimensions
Table size 35.38” X 19.63”
Number of tee slots and pitch 5 @ 100 mm
Tee slot width 0.710” or 18 mm
Table maximum load 1000 lbs.
Ball Lock ® hold down force 2250 lbs @ 35 in/lbs of
torque
Travel
X-axis 31”
Y-axis 18.5”
Z-axis 21”
Maximum distance from spindle nose table surface 24”
Minimum distance from spindle nose table surface 3.375”
Maximum swing clearance from spindle center to column 19.25”
Maximum Rapid speed X-axis, inches per minute 800
Maximum Rapid speed Y-axis, inches per minute 800
Maximum Rapid speed Z-axis, inches per minute 700
Spindle
Tool holder type CAT40
Spindle nose diameter 2.75
Maximum RPM 8000
Automatic Tool Changer
Tool Capacity 16
Maximum tool weight including holder 15 lbs
Maximum tool diameter 3.14
Carousel speed .8 sec from station to station
Tool selection system Bi-directional/ shortest path
Retention knob See section 3.3.11
Air Requirements
Pressure 90 psi
Quality Air dried/ water separator upstream of the LPM