Specifications

18
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
AIR: controls air blast from spindle to help clear chips. Press to turn air on (ON LED is
lit). Press again to turn air on (AUTO LED is lit) when commanded by the program in
Run Mode. Press again to turn air off.
WASH: press to activate chip wash to help move chips down to the chip auger location.
DOOR LOCK: activates the door lock mechanism whenever a program or other
automatic move is running. The LED light on the key is on when the door lock
mechanism is active (it is possible for the door to be locked without the light being on).
CHIP REMOVAL: press Forward (FWD) to activate chip auger, press again to turn off.
Press and hold Reverse (REV) to drive chip auger in reverse to help clear jams (make
sure FWD is off).
ATC INDEX: press forward (FWD) to index the automatic tool changer carousel forward
by one tool. Press Reverse (REV) to index the automatic tool changer carousel
backwards by one tool. The door must be closed.
3.2.3 Pendant Right Side
Inset on the right side of the pendant are four USB ports for the thumb drive, keyboard,
mouse, etc. Above these is a green Servo On button that must be pressed to activate
machine motion following power start up or after the E Stop button is pressed.