Specifications

13
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
• Convenient ATC capacity
Machine Set Up Mode Features
• Advanced diagnostic routines
• Software travel limits set in the factory
• Prompted Tool loading and ATC Management
• Checklist to assure nothing is forgotten
• Single key press to get to step needing attention
Run Mode Features
• TRAKing
• 3D CAM file program run
• 3D G code file run with tool comp
• Real time run graphics with tool icon
• Countdown clock for total part cycle time or manual tool change
• Error alarms prevent Run when set up steps are skipped
• Work on Staged programs while Current program runs
Program In/Out Mode Features
• CAM program converter
• Converter for prior-generation ProtoTRAK programs
• DXF/DWG file converter (Optional)
• Selection of file storage locations
• Automatic file back-up routine
• Preview graphics for unopened files
• Networking
• Create Master routine for combining programs
• Transfer of Staged program to Current
• Tool reconciliation for Master Programs
3.1.3 ProtoTRAK PMX Control Options
The DXF File Converter Option
• Import and convert CAD data into ProtoTRAK programs
• DXF or DWG files
• Chaining
• Automatic Gap Closing
• Layer control
• Easy, prompted process you can do right at the machine
CAM Out Converter Option
• Save ProtoTRAK files as CAM files for running on different controls
3.1.4 DXF File Converter Option
The DXF File Converter Option gives you powerful capability for quickly and easily
translating DXF and DWG files into ProtoTRAK programs. If you work with CAD
drawings, we highly recommend that you get a demo of the DXF file converter.