Specifications

122
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
13.0 Run Mode
13.1 Run Mode Screen
Press MODE and select the RUN soft key. Below is a description of what is displayed on
the RUN screen.
There are 4 windows at the top of the screen that display the following:
RUN: displays that you are in RUN mode
P/N: displays the part number that is running
TIME: displays the total time it takes to cycle through the program.
INCH: displays whether you are in inch or mm mode.
Items in the main screen:
ATC Pos.: indicates the position of the Tool Carousel, the location that is facing the
spindle
LOC: with a tool in the spindle, this window displays the carousel location that the tool
belongs in.
Tool #: displays the tool number that is in the spindle.
Tool Diameter: displays the tool diameter.
Description window: displays the tool description, for example, DRILL, TAP, etc.
Event Counter: this will be the current event number and event type.
Part Counter: when running a Master Program this window displays whether you are
running the 1st, 2nd, 3rd, ....nth part.