Specifications

108
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
11.2.1 TOOL CRIB
When a tool is removed from the ATC table, you have the option of storing it in the Tool
Crib Section. The Tool Crib is a separate page that will keep track of up to 100 tools that
have already been previously defined. By storing it in the Tool Crib, you have the ability
to quickly assign it back into the ATC along with its offset.
Tool Crib
ADD ATC: After highlighting the tool that you want to add back into the ATC table,
enter an ATC location that is not currently being used into the “ATC Loc” field, and the
press the ADD ATC button. This will transfer the tool from the tool crib back into the
ATC table in the tool management page.
NEW TOOL: Press this button to create a new tool from scratch. You can then enter
values for all the necessary fields, and then add it to the ATC table.
REMOVE TOOL: Press this button to delete a tool from the tool crib.
11.2.2 REMOVE TOOL
This button will remove the highlighted tool from the ATC side of the table. You will be
prompted whether or not to store the tool into the TOOL CRIB. Select YES to move the
tool into the TOOL CRIB, or select NO to permanently delete the tool. Once the tool is