User Manual

43Using Wireless Multi (Stroboscopic) Mode

To set your VX-760C as wireless stroboscopic master, follow these steps:

1. Turn the ash on and press the MODE button repeatedly to cycle through the ash modes until MULTI

appears on the LCD.

2. To set the VX-760C as the master, press and hold the SUB button until the wireless ash icon and the

group and channel settings appear on the LCD. The channel number appears with a C next to it and blinks

alternately with the stroboscopic count number.

3. Use the left and right navigation buttons to adjust the ash output.

4. Set the number of ashes by pressing the SUB button so the stroboscopic count number blinks. Use the

left and right navigation buttons to adjust the number of ashes, or the up and down navigation buttons

for the minimum and maximum number of ashes. When the desired stroboscopic count number appears

on the LCD, press the MODE button to select it.

5. Set the ring frequency by pressing the SUB button repeatedly until the stroboscopic frequency number

blinks. Use the left and right navigation buttons to adjust the frequency, or the up and down navigation

buttons for the minimum and maximum frequencies. When the desired stroboscopic frequency number

appears on the LCD, press the MODE button to select it.

6. Set the group by pressing the SUB button until the wireless ash icon and the group and channel settings

blink. Use the left and right navigation buttons to select ALL, AB, or ABC, and press the MODE button to