User Manual

38
|
38
|
Using Your VX-760C as a Wireless Master or Slave
Using Your VX-760C as a Wireless Master or Slave
The VX-760C is equipped with advanced wireless ash functions, allowing you to re the ash remotely while
maintaining full TTL or manual control. In addition, the ash can be set to multiple channels and groups, giving
you a host of creative lighting possibilities.
Important terms: Here are the terms you’ll need to be familiar with in order to learn how to work with multiple
wireless ash units:
Master: This can be the camera’s built-in ash, a ash unit mounted on the camera, or a dedicated wireless
controller. The master controls how the slave ashes operate in wireless TTL mode. Only one master ash is
allowed in a multiple-ash photography setting. Note that not all cameras and ashes offer master capability.
Slave or remote ash: Flash units that are not directly connected to the camera and are controlled via the
master ash or a controller are called slave or remote units. There is no limitation on the number of slave ash
units that can be used at once.