User Manual

Using the Multi (Stroboscopic) Mode

The multi (stroboscopic) mode res the ash multiple times in quick succession during a single exposure.

Stroboscopic lighting is often used to illustrate motion—when shooting in a dark environment, this can create

a unique effect in which moving objects appear multiple times in the frame. It is also useful when capturing

extremely fast objects, because the ash can pulsate faster than the camera lens can open and close.

To enable the multi mode, turn on the ash and camera and follow these steps:

1. Press the MODE button repeatedly to cycle through the ash

modes until the multi mode and ash output level indicators

appear on the LCD. Use the left and right navigation buttons

to set the ash output.

2. Set the number of ashes by pressing the SUB button so

the stroboscopic count number blinks. Use the left and

right navigation buttons to adjust the number of ashes, or

the up and down navigation buttons for the minimum and

Zoom