User Manual

Using the Automatic TTL Flash Mode

When the VX-760C is mounted on a compatible camera, it can set the appropriate ash level automatically,

in conjunction with the camera’s through-the-lens (TTL) metering system. To use the automatic ash mode,

mount the ash on the camera and follow these steps:

1. Turn the ash on and press the MODE button repeatedly to cycle through the ash modes until the TTL

mode indicator appears on the LCD.

2. Make sure your camera is set to a programmed or automatic mode, or on a priority mode such as

aperture priority.

3. Press the shutter-release button on your camera halfway

to ensure that the camera is communicating with the ash.

The camera’s aperture settings will appear on the ash

LCD, and a ash icon will appear in the camera’s viewnder.

4. Press your camera’s shutter-release button to take the

picture.

Zoom