User Manual

Using the Manual Flash Mode

Note: When decreasing the ash output in increments of one-third from one setting to a lower setting + 0.3

or 0.7, you will need to decrease it to the next lowest setting, and then ne tune it up. For example, when

decreasing from 1/4 to 1/8 + 0.7, you will need to decrease to 1/8, and then increase to 1/8 + 0.7.

When setting exposure settings on your camera, the highest shutter speed available will be your camera’s

ash sync speed.

Tip: For best results, use a handheld light meter when shooting in manual ash mode.