User Manual

Using Flash Exposure Bracketing

2. Press the SUB button repeatedly until the FEB icon blinks. Use

the left and right navigation buttons to adjust the FEB value, and

the up and down navigation buttons to ne-tune. Press the SUB

button again to conrm your selection.

3. Use the left and right navigation buttons to set the ash

exposure compensation, and the up and down navigation

buttons to ne-tune.

To turn off ash exposure

compensation, set the FEB value

to 0 and press the SUB button to

conrm your selection.

Note: The LCD will display 1b

after the rst shot, and 2b after

the second shot. As always, the

ash exposure compensation will appear on the LCD before each shot. Flash exposure bracketing turns off

automatically after you re three shots.

Important! Make sure your ash is recycled and ready before taking each shot.

Zoom

ISO

Zoom

ISO

Zoom

ISO

NOTE