User Manual

20
|
Extended Interface
To access the extended interface, follow these steps:
1. Pull back the contact cover on the side of the ash.
2. Plug the cable into the corresponding socket or terminal.
A. For an external power source, plug the power cable
(Canon CZ-type, not included) into the external
power source socket.
B. For PC sync, plug the PC cord into the PC sync
terminal.
Note: When using both cables at the same time, rst insert the PC cord and then insert the power cord. Very
rarely, a thick-proled PC cord will not t at the same time as the power cable. In that case, use the supplied
PC cord.