User Manual

Turning on the Flash and Firing a Test
|
17
Automatic power-saving function: After three minutes of inactivity, the ash will automatically enter power-
saving mode to conserve battery life. The LCD and the ash ready light will turn off. To reactivate the VX-710C,
press the PILOT button or press your camera’s shutter-release button halfway. During long periods of inactivity,
use the power switch to turn the ash off completely.
LCD illumination: When you turn the ash on or press any button, the LCD will be illuminated for about six
seconds.
Audio monitor: The audio monitor feature causes the ash to emit one or more beeps to indicate the status of
the ash:
Audio monitor Status of VX-710C Operation
One beep Pressed button/red ash Normal
Two beeps Flash ready Normal
Long beep for 10+ seconds Entering overheating protection
mode
Turn the ash off for 10 minutes
to let it cool off
Continuous beeping for approx.
10 seconds
Low battery warning Replace batteries