User Manual

Mounting the Flash

To dismount the ash from your camera, make sure the

VX-710C is turned off and follow these steps:

1. Rotate the locking wheel counterclockwise to release the ash.

2. Slide the mounting foot out of your camera’s hot shoe.

Mounting the VX-710C on the included stand:

You can mount the VX-710C on the included stand in the same way you would mount it on your camera. This

allows you to set the ash up on a at surface, or to attach it to a tripod head, light stand, or clamp that has a

compatible 1/4”-20 screw mount.