User Manual

Mounting the VM-110

2. Slide the mounting

foot all the way into

your camera’s hot

shoe.

3. Rotate the locking

wheel clockwise until

secure.

To mount the LED ring light on your camera, follow these steps:

1. Determine what size adapter ring will t your camera lens; the

engraving on the ring should match your lens’ lter thread.

2. Align the adapter ring with the thread on the inside of the lens,

and screw it on until secure. Do not overtighten.

3. Press and hold the adapter ring locks while mounting the ring

light onto the adapter. Make sure that the Bolt logo is on the

bottom of the ring light and facing away from the camera.