User Manual

Manual Optical Slave Modes S1/S2

To set the VC-310 to manual optical slave mode S1/S2, follow these steps:

1. Press the Mode button repeatedly until the S1 or S2 indicator appears on the LCD.

2. VC-310F and VC-310OP: Press the Set button to highlight the output level.

VC-310SMI: Press the Set button so that the output level blinks.

3. Use the left and right arrows to adjust the output level from 1/1 to 1/128.

4. Press the Set button to conrm your settings.

Warning: Some cameras, when set to red-eye reduction, will emit a series of quick ashes lasting a second or

more. This may not work properly with any slave mode. We suggest you avoid using red-eye reduction when

the VC-310 acts as a slave.