User Manual

Manual Flash Mode

You can set the VC-310’s ash output level manually, for greater creative control over your images. The 1/1

setting is the full-power ash, and each successive setting halves the light output, all the way down to 1/128.

You can also ne-tune the ash output in 1/3 increments.

To use the manual mode, turn the ash and camera on and follow these steps:

1. Press the Mode button repeatedly to cycle through the ash modes until the manual mode icon [M] and

the ash output level appear on the LCD.

2. Set the exposure settings you want to use on your camera.

3. VC-310F and VC-310OP: Press the Set button to highlight the ash output level.

VC-310SMI: Press the Set button so that the ash output level blinks.

Overview

1. Manual ash mode

2. Manual ash output power

1/128 +0 3 EV

IS0100

F5 6