User Manual

Mounting the Flash

To mount the ash on your camera, make sure the VC-310 is turned off

and follow these steps:

1. Rotate the locking wheel counterclockwise to loosen it.

2. Slide the mounting foot all the way into your camera’s hot shoe.

3. Rotate the locking wheel clockwise until secure.

To dismount the ash from your camera, make sure the VC-310 is turned

off and follow these steps:

1. Rotate the locking wheel counterclockwise to release the ash.

2. Slide the mounting foot out of your camera’s hot shoe.

Mounting the VC-310 on the included stand adapter:

You can mount the VC-310 on the included stand adapter in the same way you would mount it on your camera.

This allows you to set the ash up on a at surface or attach it to a tripod head, light stand, or clamp that has

a compatible 1/4"-20 screw mount.