User Manual

Using Your VC-310C as a Wireless Master or Slave

Slave or remote ash: Flash units that are not directly connected to the camera and are controlled via the

master ash or a controller are called slave or remote units. Many slave ash units can be used at once.

Groups: With the VC-310C’s wireless system, you can assign slave ash units to any one of three groups (A, B,

or C) and set the operating mode and power for each group separately.

Channels: Master and slave ash units exchange data through channels. On the VC-310C, four channels (1,

2, 3, and 4) are available in the optical system. You can use this feature to prevent your slave units from being

triggered by the master unit of another photographer working with the same type of system.