User Manual
Diffusing the Flash
|
19
3. Press the Set button to highlight the ash output level.
4. Press the right or left arrows to set the desired ash
output level.
5. Press the Set button again to conrm settings.
6. Press your camera’s shutter release button to take the picture.
7. Adjust your camera’s exposure settings and the light output level of the ash as needed.
When setting exposure settings on your camera, the highest shutter speed available will be your camera’s
ash sync speed.
Tip: For best results when shooting in manual ash mode, use a handheld light meter.
Diffusing the Flash
Use the included diffuser to soften the light from the ash.
To attach the diffuser, t the diffuser onto the ash head and make sure it is secure.