User Manual

Manual Flash Mode

• Manual ash mode

• Manual ash output

You can set the VC-310C’s ash output level manually, for greater creative control over your images. The 1/1

setting is the full-power ash, and each successive setting halves the light output, all the way down to 1/128.

You can also ne-tune the ash output in 1/3 increments.

To use the manual mode, turn the ash and camera on and follow these steps:

1. Press the Mode button repeatedly to cycle through the ash modes until the manual mode icon [M] and

the ash output level appear on the LCD.

2. Set the exposure settings you want to use on your camera.

Overview

1. Manual ash mode

2. Manual ash output

3. S1/S2 indicator

1/128+0.3

SYNC