VB-11 User Manual

Repeat Mode

Repeat Mode, sometimes referred to as Stroboscopic Mode, causes the unit to re multiple ashes rapidly.

This allows the camera to capture multiple images of a moving subject in a single exposure.

To use Repeat Mode:

• Press the Mode Selection button until “RPT” is displayed on the LCD screen.

• Press the Set button until the Times indicator ashes, then use the Selection Dial to choose your desired

amount.

• Press the Set button again to adjust the ash frequency. Use the Selection dial to nd your desired setting.

• Press the Set button again to conrm your settings.

• Set your camera to the appropriate shutter speed.

• Take a test shot to conrm settings.

NOTE: To adjust your camera’s shutter speed, divide the Repeat Count number (the number of ashes per

frame) by the set frequency of the ash.