VB-11 User Manual
Optical Slave Triggering Mode
|
21
Optical Slave Triggering Mode
Optical slave triggering mode sets your ash to re wirelessly whenever it detects a signal from a master
ash.
The VB-Series bulb ashes have two slave settings: S1 Mode sets the ash to re in sync when the master
ash is triggered, while S2 Mode allows the ash unit to ignore a single “preash” from the master and only
re in response to the main ash from the master unit.
To use the optical slave triggering mode, press the Mode button until S1 or S2 is displayed on the LCD screen.
M
S
1
S2